Set a customer credit limit
The short answer
To set a customer credit limit in Zigaflow, click CRM, then Customers, open the customer and type the amount in the Credit Limit box on Main Details, then click Save. The Credit Breakdown tab lists what counts against the limit, and the remaining credit shows under the limit the next time you open the customer.
Watch the walkthrough
Transcript (1:23)
Here is how to set a credit limit for a customer in Zigaflow.
Click CRM, then Customers. Click the customer you want to set a limit for.
On Main Details, type the limit in the Credit Limit box. Then click Save, the disk icon at the top right. A green message confirms the change.
Click Credit Breakdown. It lists what counts against the limit: invoices that are not paid, credit notes, and the part of each job that has not been invoiced yet.
The next time you open the customer, the remaining credit shows under the limit. If the customer goes over, the line turns red and reads No Credit, with the amount of the excess.
If you have old jobs that were never invoiced in Zigaflow, click the cog, then Financial Settings, then Credit Limit Settings. Set a cut-off date, and jobs that ended before it are left out.
That is the credit limit set. To take it off again, click the bin beside the limit and save.
Steps
Open the customer
Watch this step (0:05)Click CRM, then Customers. Click the customer you want to set a limit for.
Type the limit and save
On Main Details, type the limit in the Credit Limit box.
Click Save, the disk icon at the top right. A green message, Details Updated, confirms the change.
Watch this step (0:18)See what counts against the limit
Click Credit Breakdown. It has three lists: invoices that are not paid or cancelled, credit notes that are not paid or cancelled, and the part of each job that has not been invoiced, for jobs that are not cancelled.
Amounts include tax.
Watch this step (0:30)Check the remaining credit
The next time you open the customer, the remaining credit shows under the limit.
If the customer is over the limit, the line is red and reads NO CREDIT, with the amount of the excess.
Watch this step (0:43)Leave out old jobs with a cut-off date
If you have old jobs that were never invoiced in Zigaflow, click the cog at the top right, then Financial Settings, then Credit Limit Settings.
Set a cut-off date and save. Jobs whose end date is earlier are left out of the customer's credit exposure.
Watch this step (0:57)
How the remaining credit is worked out
Remaining credit is the limit less what the Credit Breakdown tab lists. In the walk-through, a customer with a limit of 2,000 and one job of 1,008.00 including tax that had not been invoiced showed a remaining credit of 992.00.
Tip
To take a limit off, click the bin beside the Credit Limit box, then click Save.
Frequently asked questions
Was this helpful?