MCS Product Directory: what it lists and how installers use it
The MCS Product Directory is the public, searchable register of products certified to MCS Product Standards, which installers check before quoting or installing certified renewable systems.
In short
The MCS Product Directory is the register of MCS certified products, run by MCS, and certified installers must use listed products. Search the exact model and check its certification period before you quote.
The MCS Product Directory is the public, searchable register of products that have been certified against MCS Product Standards. It is maintained by MCS, the Microgeneration Certification Scheme, which describes itself as the UK's quality mark and consumer protection body for renewable energy technologies. An installer has to find the product in the directory before quoting because MCS says certified installers must install an MCS certified product, with battery storage the stated exception. A product that is not listed cannot be used on a certified installation, and the grants that depend on that certification are out of reach for the customer.
What the directory lists
The directory holds certified products across the technologies MCS certifies, including solar PV, heat pumps, solar mounting, biomass, small wind turbines, solar heating and micro CHP. Each entry shows a model number, a certification number and a certification period. You can search by technology type, certification status and certification period. Some entries are labeled with a grace period next to the certification number, so read the certification period as well as the model name.
MCS product certification covers products up to a set size: 50kW for electrical technologies and 45kW for heating, or 70kW where several heating units sit in one installation.
Why installers quote from it
Government funding in the UK often mandates MCS certification. MCS names the Boiler Upgrade Scheme and the Home Energy Scotland Grant and Loan as examples, and says the products used in those installations must be MCS certified. Under the Boiler Upgrade Scheme, Ofgem says the installer applies on the customer's behalf and that the grant should reach the customer as an upfront discount on the quote. If the quoted product turns out not to be certified, the installer has priced a discount it cannot claim.
Product lists change, so a check at quote stage is not enough on its own. A sensible routine has three checks:
- Search the directory by model number when you build the quote.
- Record the certification number and period against the quoted line.
- Check the status again before ordering and before commissioning.
> Tip: Model numbers are easy to mistype and some listings cover ranges of wattages. Match the exact variant on your supplier's datasheet to the directory entry, not just the product family.
Directory versus installation database
The Product Directory lists products. The MCS Installations Database (MID) records completed installations. They are separate registers, and an installer needs to use both at different stages. The directory is the one to check at quote and purchase.
Keeping the check inside your quoting process
Keep the certification number and period on each product line of your quotes, and keep your inventory records by model, so a changed listing can be checked against open quotes and stock. This matters for renewables installers, where quotes are often revised several times before the order is placed.