How-to guide

How to price embroidery: stitch count, setup and garment cost

Beginner10 min read

Zigaflow Editorial

Published

Zigaflow Editorial publishes Zigaflow's guides, insights, industry resources, glossary and workflow pages. Zigaflow is responsible for what they say. Spotted an error? Email support@zigaflow.com.

In short

Price embroidery as three lines: the garment, a run charge based on stitch count and quantity, and a one-off digitizing fee. Quote them separately and show the reorder price without digitizing.

  • Price the garment, the stitch-based run charge and the digitizing fee as three separate lines.
  • Charge digitizing once per design and never fold it into the per-piece price.
  • Set your run rate from your own hourly cost and machine speed, then sense-check it against market ranges.
  • Put quantity breaks on the run charge only, never below your garment cost.
  • Show the reorder price without the digitizing line so repeat orders are visibly cheaper.

Embroidery quotes go wrong when garment, stitching and digitizing are blended into one price. This guide shows how to price each separately, keep small runs profitable and show customers why a reorder costs less.

An embroidery business works out a price per garment by adding three things: the cost of the blank garment plus markup, a run charge that follows stitch count and quantity, and a digitizing charge that is paid once for the design rather than on every piece. The garment and the run charge repeat on every item. The digitizing fee and any setup do not, so they belong on their own line, charged once. Showing the three separately keeps small runs profitable, because the one-off work is never hidden inside a thin per-piece price, and it makes a reorder visibly cheaper, because the digitizing line simply disappears.

This guide walks through that structure for shops that decorate workwear, teamwear and promotional garments, and for garment decoration businesses that quote a mix of one-off and repeat orders. The example figures are illustrative, so replace them with your own costs and your own currency.

Why three separate lines beat one blended price

Many shops quote a single all-in price per garment. It is quick, but it breaks down in two places. On a run of 12 polos, the digitizing fee is a large share of the total, so a blended price either overcharges or loses money. On a reorder of 200 of the same design, the blended price still carries a digitizing cost that was paid for long ago, so the customer sees no reward for coming back.

Splitting the price fixes both. The customer can see that the logo is a one-time investment, and you can show exactly why the second order is cheaper. One pricing guide aimed at embroiderers makes the same point: a digitized file is reusable for later reorders, so it is worth telling customers the charge is one-time.

The method, step by step

1

Price the blank garment on its own line

Start with what the garment costs you landed, including any carriage, then add your markup for handling and stock risk. Keep this separate from decoration so you can change the garment (a different polo, a hoodie instead of a tee) without recalculating the embroidery. If the customer supplies the garments, this line is simply zero, but the decoration lines stay the same.

2

Count the stitches for each logo placement

Get the real stitch count from the digitized file where you have one. If you are quoting before digitizing, estimate from the design size and density, and round up to the next 1,000 so an under-estimate does not eat your margin. Treat each placement as its own design: a left-chest logo and a back print have different counts and are digitized separately.

3

Set a run rate per 1,000 stitches from your own costs

Work backward from your cost. Divide your yearly running costs by your productive hours to get an hourly cost, divide that by the stitches your machine realistically sews per hour, and add the profit you want per 1,000 stitches. One US pricing guide gives a typical market range of roughly $1 to $3 per 1,000 stitches, but it stresses that the right figure depends on your costs and local market. Use the range as a sense check, not as your rate.

4

Add a minimum charge per placement

A tiny design priced purely by stitch count can come out at pennies. A minimum charge per placement covers hooping, thread changes and handling that stitch count does not capture. Pricing guides for embroiderers commonly recommend one, and it protects small orders where handling time is a large part of the job.

5

Build quantity breaks into the run charge

Run charges fall as quantity rises, because setup time is spread across more pieces and the machine stays busy. Put the breaks on the run charge only. Do not discount the garment cost below what you paid, and do not let the discount touch the digitizing line. Set the bands to match the order sizes you actually see, with the price per piece falling at each step.

6

Charge digitizing once, as its own line

Digitizing converts the artwork into a stitch file your machine can run. Charge it once per design, at the price you pay a digitizer or the value of your own time, and consider waiving it above a set quantity. Published ranges for a standard logo are in the tens of dollars in the US, with complex or large designs higher, so check what local digitizers charge. Our guide on how to digitize a logo for embroidery covers what drives that cost.

7

Quote the three lines side by side and mark the reorder price

On the quote, show the garment, the run charge for the quantity, and the digitizing charge as three visible lines. Then state the reorder price underneath, the same quote without the digitizing line. A ready-made layout such as the embroidery workwear quote template keeps the lines consistent from quote to quote.

Check the margin before you send it

Once the three lines are built, test the total. Work out your margin on each line, not only on the whole job, because a healthy overall figure can hide a loss on decoration. The markup calculator helps you move between markup and margin, which are easy to confuse. Make sure you know which one your target refers to.

Show quantity options without redoing the quote

Customers often ask what happens at 24 instead of 12. Rather than rebuilding the quote each time, present the quantity breaks together so they can see the per-piece price fall. Zigaflow's tiered quotes feature is built for presenting several quantity options on one quote, which suits this kind of run-charge table. Whatever tool you use, the principle is the same: the garment cost and run charge move with quantity, the digitizing charge stays fixed.

A worked example

Take 24 polos with a 6,000-stitch left-chest logo, using illustrative numbers. The blank costs 8.00 and carries a 40 percent markup, so the garment line is 11.20. Your run rate is 2.00 per 1,000 stitches, so 6,000 stitches is 12.00. The minimum charge is lower than that, so the 12.00 stands. Per piece, that is 23.20. Digitizing is 35.00, charged once. The order total is 24 times 23.20, which is 556.80, plus 35.00, so 591.80.

On the reorder of 24 polos, the digitizing line is gone and the total is 556.80. The customer can see the 35.00 saving and why it exists. If you had blended the digitizing into the piece price, that saving would be invisible, and you would be tempted either to keep charging for it or to give away margin to win the repeat.

Common pitfalls

  • Pricing only by stitch count and ignoring hooping and handling on hats, bags and awkward items. Use an hourly view for those.
  • Waiving digitizing on a tiny run, which turns the first order into a loss.
  • Forgetting that each placement is a separate design with its own digitizing charge.
  • Applying quantity breaks to the garment cost, so a large run sells the blank below your margin.
  • Quoting a reorder price from memory instead of from the saved design, so the file and the price drift apart.

Common questions

It depends on your costs, so work it out rather than copying a number. Divide your yearly running costs by productive hours, divide that hourly cost by the stitches your machine sews per hour, then add the profit you want. US pricing guides cite a range of roughly $1 to $3 per 1,000 stitches, which is useful as a sense check against your own figure.

See it in Zigaflow

Ready to put these ideas into practice?

Book a demo and see how Zigaflow fits your team.

Or see how Zigaflow would fit your business, free