Checklist

Reading your P&L: what each line tells you about the business

Beginner10 min read

Zigaflow Editorial

Published

Zigaflow Editorial publishes Zigaflow's guides, insights, industry resources, glossary and workflow pages. Zigaflow is responsible for what they say. Spotted an error? Email support@zigaflow.com.

In short

A P&L shows income, costs and profit for a period, and you read it from revenue down to net profit. Check each line against your job costing, starting with cost of sales, to find which jobs made or lost money.

  • Read a P&L from revenue down to net profit, because each line answers a different question.
  • Compare the cost of sales line with the actual costs recorded against your jobs every month.
  • Check gross margin against the margin you quoted to find where pricing or delivery slipped.
  • Express overheads as a share of revenue to spot costs growing faster than sales.
  • Test net profit against your bank balance, since profit and cash move at different speeds.

A profit and loss statement tells you whether the business made money, but not which jobs earned it. This guide walks through each P&L section in order and pairs it with the job costing check that explains the number.

A profit and loss statement (P&L) shows what a business earned, what it spent and what was left over across a set period, usually a month, quarter or year. Read it from the top down: revenue first, then the direct costs of delivering the work, then overheads, then what remains. The order matters because each line answers a different question, and the first answer that looks wrong tells you where to dig. A P&L only becomes useful when you check each line against your job costing, because the statement tells you the business made or lost money, while your jobs tell you which ones did it.

Why the P&L alone is not enough

A P&L is a summary. It adds every sale and every cost into a few totals, which is exactly why it hides the thing an owner most needs to know: which jobs made money and which quietly lost it. Two businesses can post the same gross profit with very different health. In one, every job lands near its quoted margin. In the other, three jobs earn 40% and two lose money, and the average looks fine until the losing type of work grows.

Job costing fills that gap. When each job carries its own quoted cost, actual supplier spend and actual labor, you can take any line on the P&L and trace it to the jobs behind it. The steps below pair each P&L section with the job-level check that explains it. Use the same period for both, and use a period that has been closed, with supplier invoices entered, or the comparison will mislead you.

Reconcile before you read

Before analyzing anything, confirm that every sales invoice and supplier invoice for the period is booked. A P&L missing a late supplier invoice flatters profit and sends you looking for the wrong problem.

1

Start with revenue and ask whether it is the right revenue

Revenue, also called turnover or sales, is the top line. The question it answers is whether you billed what you actually delivered. Compare the revenue total with the value of work completed in the period, not just with last month's figure. If revenue is up but completed work is flat, you may be billing deposits or stage payments ahead of delivery, which will reverse later. If revenue is down while jobs finished are steady, invoices are sitting unissued. Check the list of invoices raised in the period against jobs marked complete, and look for finished work with nothing billed.

2

Read cost of sales next and match it to job costs

Cost of sales (also called cost of goods sold) holds the costs that exist only because you did the work: materials, bought-in products, subcontractors and the labor directly on the job. It answers whether delivering the work cost what you expected. This is the most important comparison in the whole exercise. Add up the actual costs recorded against each job in the period and compare the total with the cost of sales line. They should be close. A gap means costs are being booked to the wrong place, or spend is happening that no job knows about. Open jobs and look at actual versus quoted cost for the largest items first.

3

Calculate gross profit and compare it with the margin you quoted

Gross profit is revenue minus cost of sales, and gross margin is that figure as a percentage of revenue. The question it answers is whether your pricing covers the direct cost of the work. Compare the percentage with the average margin on the quotes you won. If you quote at 35% and the P&L shows 28%, the seven points went somewhere between quote and invoice. Typical causes are supplier price rises after quoting, extra labor hours, unbilled variations and discounts given at invoice. Sort jobs by margin variance and read the worst five. The pattern in them is usually one repeated cause.

4

Review overheads line by line and decide which are fixed

Overheads, sometimes called operating expenses, are the costs of running the business whether or not a job is on: rent, software, insurance, office salaries, vehicles, marketing and professional fees. The question they answer is whether the business can carry its own weight. Go line by line, and mark each as fixed or variable. Then compare each one with the same period last year, as a share of revenue rather than in pounds or dollars. Overheads that grow faster than revenue are the quiet reason a healthy gross margin turns into a thin net one.

Misplaced costs distort margin

Costs sit in the wrong section more often than you would think. Installer wages booked as overheads make gross margin look better than it is and make every job appear more profitable than it was.

5

Check operating profit before interest and tax

Operating profit is gross profit minus overheads. It answers the cleanest question on the page: does the day-to-day business make money, before financing and tax? A business can have a healthy gross margin and still have no operating profit if overheads have crept up. If operating profit is thin, you have two levers, win more margin on each job or cut overhead, and the earlier steps tell you which is the real problem. If gross margin is below target, fix pricing and job cost control. If gross margin is fine, look at overhead.

6

Finish with net profit and test it against cash

Net profit is what remains after interest, depreciation, tax and any other items below operating profit. It answers what the owners actually earned for the period. Then do one more check that the P&L cannot do for you: compare net profit with the change in your bank balance. A profitable month with falling cash usually means money is tied up in unpaid invoices, stock or work in progress. The P&L records profit when work is billed, not when you are paid, so read it alongside your debtor list and your cash flow.

A worked example of reading it against jobs

Suppose a trade business bills 120,000 in a quarter and its P&L shows cost of sales of 84,000. Gross profit is 36,000, a 30% margin, against an average quoted margin of 36%. The six-point gap is worth about 7,200 for the quarter.

Opening the jobs behind the cost of sales line, the owner finds that most jobs sit within a point of their quote. Two jobs account for almost the whole gap. On the first, the supplier raised a price after the quote went out and the quote was not revised. On the second, the team spent an extra 40 hours on a variation the customer never approved in writing. The P&L said only that margin was down. The job costing said why, and the fixes are specific: reprice quotes older than 30 days before accepting orders, and get written approval for variations before work starts.

Common mistakes when reading a P&L

Most errors come from reading the totals alone. The first is comparing a single month with the previous month, when seasonal work makes year-on-year more honest. The second is trusting a P&L built on cash receipts, which hides unbilled work and unpaid supplier invoices. The third is treating net profit as the only number that matters, which skips the gross margin line where most pricing and delivery problems appear first. The fourth is never reconciling to jobs at all.

If you can only do one thing, do the cost of sales comparison in step 2 every month. It takes the P&L from a report you file to a tool you manage the business with, and the reporting in your management software should let you pull revenue and cost by job so the comparison is a quick check, not an afternoon's work in a spreadsheet.

Read the P&L the same way every month, in the same order, and write down one question per section that you cannot yet answer from your job records. Those questions show you what your job costing needs to capture next.

See it in Zigaflow

Ready to put these ideas into practice?

Book a demo and see how Zigaflow fits your team.

Or see how Zigaflow would fit your business, free