Get set up

More document template troubleshooting

In Zigaflow

The short answer

Most Word template problems in Zigaflow have a specific fix. Failed imports often come from special characters, drawing objects or a header row mixed with section tags. Missing items usually come from hidden formatting characters. Slow previews come from large amounts of text, and footer overlaps from a footer height set too low.

What to Avoid

  • Don’t copy an image directly from another document to the new one. Save it to disk and insert it
  • Don't use drawing objects. Instead, save it as an image and re-import that and replace the drawing object
  • Be sparing on how much detail you put in the document's footer or header. A large amount of content can cause issues
  • Image positioning; basic positions such as behind text or at the bottom of a page works, but others, such as tight around text will not. Usually, the failure to recognise the formatting will result in the image missing rather than the template failing to load
  • Don't use some special characters. This includes soft carriage returns (where the enter key is pressed when the shift key is held down) and indents. These will cause the import of the template to fail. You can check if you have any by clicking on show/hide formatting button in Word (see below):

Can't Load a Template?

  • Make a copy and work with this
  • Make sure that the items' table header row just has headers - don't mix the headers with {Section} or {SectionNotes}. Put these on a separate row
  • Check for special characters and remove them. Save and retry
  • Check for drawing objects and remove any if present. Save and retry
  • Remove images. Save and retry
  • Continue deleting content until the document imports. The last item deleted was probably the one causing the issue
  • Remove the offending item from the original template and import into Zigaflow

Incorrect Image Sizes

Previewing is Very Slow

This may be because your document has a large amount of text.
Zigaflow checks through all the text for tags to change to values in your quote or invoice, etc. This occurs with Word documents with a large quantity of text, so convert the document to a PDF and where you need tags to be added, use Editable Controls (we are happy to help you with this).
If your document is a mixture of extensive text and repeating items (such as products or services), split them into a Word Document for the products /services and one or more PDFs for the large quantity of text and add both templates to the quote /invoice/ etc. preview.

Items are Missing

This usually happens when there are unexpected formatting characters in the item's fields (such as the product code, description, or extended description). Frequently, this occurs when the text has been copied and pasted over from a Word document.
To fix this:

  • Copy the text from the problem item and paste it into something like Windows Notepad (which does not support any formatting apart from carriage return).
  • Copy the text now in Notepad. It is important you copy this text and not the text from Zigaflow.
  • Paste it back into Zigaflow
  • Save the change
  • Try the preview again

Section(s) are/is Missing

  • Check that the section is not ticked with 'Hide from Client'.
  • Check that the PDF template has a section styleIf it does, make sure the section in the document is set to that style as well.

The tables are split across two pages.

  • Open the template in Word
  • Go to the Home tab
  • Select 'Paragraph'
  • Select the 'Line and Page Breaks' tab
  • Tick 'Keep lines together'
  • Tick 'Keep with next'
  • Click OK
mceclip1.png

Tables Run Across Each Other

  • Check the table's text alignment
  • Right mouse click on the table
  • Select 'Table Properties...'
  • Select the 'Table' tab
  • Make sure 'None' is selected
  • Save and upload the template to Zigaflow
image.png

Content Runs Over Footers

This is usually because the height of the footer is not set high enough. Edit the footer and make the 'Footer from Bottom' higher:

mceclip0.png

If this still occurs, make sure that if you have a different footer for the first page that it is the same height as you need for the next.

mceclip1.png

Zigaflow picks up the first page's footer height and ignores the setting for the subsequent pages.

'Note to Client' is Unpredictable

Cause 1: Note is in a Section Table

This can happen where the {Note} is within a section or items table. For the best results, it should be outside these tables. It can be in a separate table that is not copied by the system (which the section/item tables are).

Unpredictable

mceclip0.png

Better

mceclip1.png

Also Better

The notes in a non-section table:

mceclip2.png

Cause 2: Font Settings

This is where you may have formatted the visible elements in the document to be to one font. e.g. 'Calibri Light' but the note comes out in a different format (e.g. 'Times New Roman').

This can be because the 'Normal' format is set up to a different font to the one you expected to see or use. To check this right mouse click on the 'Normal' font:

mceclip0.png

Check that the font set is what you expect to see:

mceclip1.png

If it is not, change and save the new font.

Learn more: document templates in Zigaflow

Frequently asked questions

Next step

Document templates explainedDocument templates in Zigaflow are Microsoft Word files. You can edit them in the system, or download them, edit them and upload them again. Download a system template as your starting point, start with one module's templates, then copy them to the other modules. Keep static and expanding data in separate tables.

Was this helpful?

See Zigaflow on your own workflow

Book a demo and we will walk through quoting, jobs and purchasing the way your team runs them.

Or see how Zigaflow would fit your business, free